Miscellaneous Tools
Adjustable Parallel Lines Clay Cutter
Wooden Adjustable Parallel Lines Clay Cutter Ref.TD8
£6.30 inc VAT
Assorted Plunger Cutters Set Of 6
Assorted Plunger Cutters Set Of 6
This 6 tool set that lets you create shapes out of clay, dough, gum paste, greenware, candle wax, etc. Similar to a cookie cutter they have a brass body and a stainless spring-equipped plunger. The body of each cutter is 1" high and produces a shape approximately 1/2" across. Use the outside shape or apply the cutout inside shape to decorate other pieces.
£10.90 inc VAT
Assorted Plunger Cutters Set Of 6
Assorted Plunger Cutters Set Of 6
This 6 tool set that lets you create shapes out of clay, dough, gum paste, greenware, candle wax, etc. Similar to a cookie cutter they have a brass body and a stainless spring-equipped plunger. The body of each cutter is 1' high and produces a shape approximately 1/2' across. Use the outside shape or apply the cutout inside shape to decorate other pieces.
£10.90 inc VAT
Chamois Leather Strips x 4
Chamois leather strips, size may vary as this is a natural product
Length between 15cm-20cm
Width 5cm approx.
Excellent for giving an extra smooth finish on the rims of pots.
£5.40 inc VAT
Clay Smoother With Soft Grip Handle
Flexible spring steel blade with a soft comfort grip for smoothing large slabs of clay.
from £9.00 inc VAT
Double Sided Edge Rounder
Slide this tool along side the edge of your wet or leather hard clay slab to make a beautiful smooth round edge.
Size: Dia 10mm & 15mm
£13.00 inc VAT
Finger Spinner Trimmer Tool
This is rotary tool to help you with trimming pottery on a pottery wheel. Works like a "mini lazy susan".
Works by placing it in a center of the workpiece in order to trim without needing clay lugs. This enables you to hold it down securely while it's spinning.
Two sizes available large is 6cm (2 1/4inch) and medium 4cm (1 1/2 inch) Height is 21mm
Made to order out of PLA plastic....
from £8.00 inc VAT
Fingerdips Glaze Dipping Aid (Pair)
Place over forefinger and thumb when dipping ware to leave a fingermark-free glazed surface. Surface tension holds a small amount of glaze in each cell so that when the ware is released whilst the glaze is still wet after dipping, the marks heal over instantly. They also provide 'grip' and act as a barrier to prevent the skin's oils from affecting glaze adhesion
£3.00 inc VAT
Flat Edged Metal Clay Smoothers
Flexible steel for smoothing wet clay
Easy to clean for re-use
Set Of 4
45mm, 70mm, 90mm, 110mm widths
£3.75 inc VAT
Flat Edged Plastic Clay Smoothers
Flexible plastic for smoothing wet clay
Easy to clean for re-use
5,8,10,12 cm widths
£3.25 inc VAT
Fluid Writer Pen
Professional application pen for use with Liquid Metal Lustres to create accurate and detailed lines.
Simply fill the reservoir with the liquid lustre, hold the tool like a pen and the product will flow smoothly enabling you to create consistent lines.
Stem cleaner included to keep the tip clear.
£9.00 inc VAT
Fluter Tool
The fluting tool is a quick and easy way to make the concave surface textures for both functional and non-functional ceramics.
Small: 7mm
Medium: 10mm
Large: 13mm
14cm total length
£8.50 inc VAT
Foot Shaper With Texture Comb C72-9
Double ended wooden foot shaper/knife with texture comb.
21.5cm
£4.68 inc VAT
Glaze Blow Sprayer Ref.C50-53
Glaze Blow Sprayer
This mouth-blow siphon is an inexpensive way to spray glaze where an air compressor is not available. Simply insert the long end into your glaze and blow through the rubber coated mouth end.
£2.74 inc VAT
Glazing Claw With Inside Gripping
Glazing claw/tongs with inside gripping for pieces with a narrow opening and not easily held in other types of tongs.
£12.00 inc VAT
Glazing Claws Small
Glazing claws much like tongs, are used to dip ceramic pieces into glaze with minium contact. They have 12 sharp points, perfect to grip flat pieces.
280mm
£16.00 inc VAT
Glazing Tongs Small 25cm
Glazing Tongs Small 25cm
These inexpensive glaze tongs feature four pointed tips to grab pots, plates and more, making minimal surface contact to allow the glaze to cover the entire piece when dipping or pouring glaze. The 10' overall length tool, features rubber coated handles and a tensioning nut.
£9.54 inc VAT
High Density Foam Mould Support
Use these foam supports in conjunction with our drape moulds. Drape the clay on the mould, invert, then press into foam to achieve a perfect foam.
Width 18'
Length 18'
Thickness 3"
£18.00 inc VAT
Kemper Pot Lift 5 Set Of 2
5' wide. Remove pottery items from the throwing wheel easily and without damage. Lifts are made from rust-free, high-strength aircraft aluminum alloy, and come in pairs.
£6.80 inc VAT
Kiln Enamel Pin
Modeled after an electric kiln, these cloisonné enamel pins are the cutest! Choose your color from the drop down menu. They come on an info card and measure about 1.5" at the widest point.
£9.60 inc VAT
Large Bevel Cutter
This angle cutter has a 45 and 60 degree wire for cutting angles on the edges of clay slabs.
Available in either wood or perspex.
from £8.65 inc VAT
Large Glazing Tongs GLAT
Glazing tongs are used to grasp ceramic ware firmly but with minimal contact, allowing you to dip the entire piece in a bucket of glaze and remove it entirely glazed, with no marks or fingerprints.
Dimension: 33 x 18cm
£21.80 inc VAT
Large Wooden Decorating Comb C16-1
Large Wooden Cushi Decorating Comb C16/1
Make patterns of two of more parallel lines when scraped across the surface of a pot.
LENGTH - 90mm
WIDTH - 50mm
£3.00 inc VAT
Mini Wooden Clay Roller
Mini Wooden Clay Roller
Perfect for rolling small amounts and portions of clay, the two rollers are held together with stainless steel. Both rollers have a 1' diameter, the shorter side is 2.45' and the longer side is 4.15' wide.
£8.87 inc VAT
Mini Wooden Decorating Comb C16-4
Mini Wooden Cushi Decorating Comb C16/4
Make patterns of two of more parallel lines when scraped across the surface of a pot.
LENGTH - 90mm
WIDTH - 20mm
£3.41 inc VAT
MKM Decorating Disk (10cm)
Diameter: 10.5cm
The MKM Decorating Disks™ for Clay is a set of two sturdyflexible transparent sheets. Each Decorating Disk has it's own even or oddsegmented divisions. Use the concentric circles to quickly center your piece.Colored radial lines indicate even divisions, (2, 4, 6, 8, 10, 12) on onedecorating disk and odd divisions, (3, 5, 7, 9) on the other decorating disk.The secret is...
£20.50 inc VAT
Mould Trimming Lucy Tool CD4104
Used to trim away the excess clay from slip cast item before they are removed from the mold.
£2.71 inc VAT
Mudtool Baby Bump
The Baby Bump has nothing to do with becoming a parent. It’s all about you being able to 'bump out' or alter the clay when working in a hollow form or cylinder. Smaller than the Bump, but longer than your hand, the Baby Bump is designed to extend the potter’s or sculptor’s reach up to 13 inches. It gives you the leverage you need to move...
£22.43 inc VAT
Mudtool Small Shaver Replacement Blade
We currently offer replacement blades for the small shredder only. Comes in packs of 2.
£7.44 inc VAT
Plastic Dragon Eye Set Of Six Stamps SE03
Plastic Dragon Eye Set Of Six Stamps SE03
Half Round Stamp-mold
Stamp-mold for making half round relief shape, such as animal eyes or screws. Six sizes: 5, 8, 10, 12, 14 and 16 mm
£9.07 inc VAT
Ribbed Wooden Paddle
Excellent paddle for paddling thrown pots and for rolling patterned coils for handles, etc. Individually patterned on each side. Measures approximately 13" x 2".
(Different design on each side)
£12.00 inc VAT
Ribbed Wooden Paddle Arrow Small
Excellent paddle for paddling thrown pots and for rolling patterned coils for handles. Ribbed on one side, smooth on the other.
Measures 26.5cm in length x 6cm in width.
£9.60 inc VAT
Ribbed Wooden Paddle Straight Line Small
Excellent paddle for paddling thrown pots and for rolling patterned coils for handles. Ribbed on one side, smooth on the other.
Measures 26.5cm in length x 6cm in width.
£9.60 inc VAT
Slab Roller Enamel Pin
Modelled on a potter's slab roller these cloisonné enamel pins are the cutest! They come on an info card and measure about 1.5" at the widest point.
£9.60 inc VAT
Small Bevel Cutter
This angle cutter has a 45 and 60 degree wire for cutting angles on the edges of clay slabs.
4' long x 1.75' tall, It is larger than the red one.
£8.04 inc VAT