Building & Repair

Ceramic Buttons used to attach ceramic fibre to the internal dimensions of a kiln. To attach: place buttons ove fibre and thread nicrome wire (high temp) through button fibre and kiln surface.†Secure connection buy twisting wire on top of cover...careful not to compress fibre as you will lose some insulating quality.

1260degC 100cm x 61cm Non Bio Soluble Kiln paper is used to keep glass, metal clay and pottery from sticking to a kiln shelf during firing. It is an easier solution to treating kiln shelves than the alternative, which is a kiln wash. Kiln wash must be applied in several layers, and must be removed and reapplied when it bubbles or chips. However, kiln paper can be a much more expensive...

H.T.I. Type Insulating Fire Brick J26 230mm x 114mm x 76mm Maximum Operating Temperature 1400 degrees. JM firericks are made from high purity refractory clays, with graduated additions of alumina for the higher temperature products and a carefully graded organic filler, which burns out during manufacture to give a uniform, controlled pore structure. These bricks give good thermal insulation,...

Used as an adhesive to stick ceramic fibre/paper to high temp bricks and metals.

500ml An inorganic liquid hardening agent for ceramic fibre blanket and board. It produces a hard surface finish with increased resistance to mechanical abrasion and to gas flow erosion. Hardener can be applied by brushing, spraying or dipping. Rigidiser will help the walls of the kiln made with blanket fibre from being too flaky. APPLICATIONS PROCEDURE Hardener is normally used diluted 50-50...