Patina Mayco Element
Description
Mayco's E123 Patina is a pale greenish glaze with yellow hues.
Mayco’s Low Fire Elements Glazes were designed to simulate the aesthetic, movement and interest of mid range and hire fire glazes. These glazes fire to cone 06 in an oxidation kiln. The level of variegation exhibited by theses glazes can be influenced by factors such as the number of coats applied, combinations with other glazes, clay body surface textures and kiln atmosphere and temperature. Mayco’s Elements are made of a freely flowing formula, which causes the glaze to move and variegate, both on its own and in combination with other glazes.
Mayco’s Elements are non-toxic. Use of a soft fan brush for application is recommended.
Some Elements may produce pleasing effects when fired to cone 6, though all will produce different colors than is seen at lower temperatures.
Cone 06: Patina is a matte, mottled mint green and copper glaze.
Cone 6: Color changes to a glossy pink that breaks over texture; mint green crystallization can occur. Enhanced mobility. Surface issues may occur.
TIP: This glaze WILL move. Take care when using on vertical pieces reduce glaze thickness towards the bottom third to minimize run-off.
118ml
Mayco Elements F.A.Q
How do I apply Elements™?
Apply to properly fired shelf cone 04 bisque. Use a soft fan or glaze brush, depending on the area and surface to be covered. Generally three coats of glaze is recommended; however, applying four coats will produce a totally different look. For a different effect, brush on three coats and apply a final fourth coat using a silk or sea wool sponge. Element Chunkies (EL-200’s) are an Elements base with the addition of crystals. Apply Element Chunkies in the same manner as Element glazes.
How are Elements™ fired?
Fire to shelf cone 06. Allow the pieces ample room in the kiln for air circulation during firing. A heavily loaded kiln will affect the color and the float within colors. Elements may also be fired at higher temperatures, up to shelf cone 6. These glazes develop their own personalities when high fired. Consult Mayco’s High Fire Guide for individual results.
Can Elements™ be Mixed with Other Glazes?
Using Elements with Pottery Coat, Pottery Coat Stucco and Pottery Cascade creates beautiful effects. However, intermixing Elements with other glazes is unpredictable; make test samples first to see if the fired result is the desired effect. Combining them with other products may alter the chemical composition and change their non-toxic status.
Product Video
People who bought this also bought...
Share
Patina Mayco Element
Facebook Twitter Email Pinterest Telegram