All Tools & Brushes: Page 11
Grid
List
Small Steel Turning Tools Set Of 4
These tools are great for shaping and texturing clays. All metal.
Dimensions (Approx): Length- 16cm. Width- 1cm. Extension- 3cm
£35.00 inc VAT
Starter Tool Set
A perfect starter tool set. All of the basic tools needed to begin making pottery on the wheel are included. Perfect for schools and beginners.
Featuring a range of shapes to create a variety of effects with your work, these pottery tools will expand your creative potential. The set includes a sponge, cutting wire, a metal scraper, a metal needle tool, a loop tool, a wooden modelling tool, a ribbon...
£10.22 inc VAT
Throwing Tool Set
A collection of essential throwing tools. All of the basic tools needed to begin making pottery on the wheel are included. Perfect for schools and beginners.
Featuring a range of shapes to create a variety of effects with your work, these pottery tools will expand your creative potential. The set includes a smoothing cloth, cutting wire, calipers, a mini throwing stick, throwing rib, a small knife...
£32.40 inc VAT
Wire Double Ended Modelling Tool Set Of 5
Smooth coiled wire ends make these tools suitable for modelling and finishing. Small loops make this tool perfect for detailed work and finishing.
Comes in five shapes, length of tools is approximately 16cm.
£18.00 inc VAT
Xiem Sculptors Wire Tool Set Small
Xiem Interchangeable Sculptor's Wire Tools are designed for artists all levels the freedom to customize their favorite wire-tool tips combination for their specific needs, getting the job done more efficiently and enjoyable. Available in several sizes in large, medium, and small. They are perfect for a light-cutting, smooth, cleaning, and blending surfaces on a variety of materials such as wax,...
£21.60 inc VAT
Wipe Out Tool Flat & Tapered Ends
This is a wooden handled tool with two, soft, flexible rubber ends. One end is flat and the other is a flat angled taper. This tool is good for leaving textures in wet clay and also for removing glaze when wet. There are many more uses you will be sure to find with this tool.
£4.09 inc VAT
Wipe Out Tool Point & Tapered Ends
This is a wooden handled tool with two, soft, flexible rubber ends. One end is a round point and the other is a flat angled taper. This tool is good for leaving textures in wet clay and also for removing glaze when wet. There are many more uses you will be sure to find with this tool.
£4.09 inc VAT
Wipe Out Tool Small Double Ended
This is a wooden handled tool with two, soft, flexible rubber ends. Both ends are a sharp point, good for minature detailed work. This tool is good for leaving textures in wet clay and also for removing glaze when wet. There are many more uses you will be sure to find with this tool.
Size:160mm
£2.58 inc VAT
Double Sided Plastic Slide Calipers 31cm
To measure the pots sizes of both inner and outer diameter at one time, perfect for measuring the sizes of lids and bodies what going to be fit together. Easily to be adjusted by hand.
Calipers for accurately taking measurements of pots or lids.
31cm
£7.50 inc VAT
Double Sided Wooden Slide Calipers 30cm
To measure the pots sizes of both inner and outer diameter at one time, perfect for measuring the sizes of lids and bodies what going to be fit together. Easily to be adjusted by hand.
Calipers for accurately taking measurements of pots or lids.
30cm
£9.60 inc VAT
Giffin Lid Master Calipers
Instead of having multiple pairs of single sided calipers, why not a double ended version that will instantly transfer any measurement to the opposite side. Thus, he developed the Lid Master™, the first double ended caliper for ceramic artists.
An important, yet lesser known feature of the Lid Master is that you can reassemble the screw in the lower set of holes and it instantly shows how...
£21.60 inc VAT
Metal Calipers
Metal Calipers
Calipers for accurately taking measurements of pots or lids.
20cm (8')
from £7.80 inc VAT
Mini Metal Calipers 10cm
Calipers transfer measurements from model to clay for both inside and outside dimensions. They are made from a rust free stainless steel, and are easily adjusted by hand. Metal calipers can be useful for all different studios from schools to small individual studios. They are durable and rust proof, which is nice if they are going to be used a lot and get covered in clay or water frequently.
10cm...
£7.20 inc VAT
Handheld Clay Extruder Gun
Handheld detail extrusion tool. With this you can force soft clay through various shaped openings in an assortment of 19 interchangeable discs. The barrel is 1.8cm diameter and 8.9cm long.
This indespensible tool helps you make bricks, tubes, grass, hair, pipes, clover, and much, much more.
Works great with Sculpey, FIMO and other polymer clays, and the gun breaks down into three parts for easy...
£13.97 inc VAT
Replacement Discs For Clay Gun Extruder
Replacement Discs For Clay Gun Extruder
Set of 19 interchangeable replacement discs
£5.44 inc VAT
Adjustable Bow Harp
Four wire in a set, replace when needs changed. (Spring-250mm, straight wire-380, 457, 535mm)
Adjustable harp cutter. For 3 length. (Length-425mm, height-160mm)
Spring shape will change to adapt the length, so you can get three patterns from one spring.
Move by wheels, easy to move.
Stainless, firm and durable material
£26.00 inc VAT
Bow Harp
Bow Harp Mini 10cm One piece construction.
Bow Harp Small 30cm (1cm increments) spare wires available.
Bow Harp Large 50cm (1cm increments) spare wires available.
Harp use to slice through clay, easily create flat slabs of clay. Gently pull towards you with two hands to slide it through your clay.
The wire can be adjusted from 7mm to a maximum height of 105mm along the wire notches every...
from £12.00 inc VAT
Hand Held Bow Harp
Harp clay cutter is made from PETG and comes with 1 stainless steel string attached.
Dimensions: 80 x 100 x 20 mm
The harp cutter is meant only for cutting clay!
£19.20 inc VAT
Large Bevel Cutter
This angle cutter has a 45 and 60 degree wire for cutting angles on the edges of clay slabs.
Available in either wood or perspex.
from £8.65 inc VAT
Metal Umakaki Bow
This umakaki trimming harp tool is used to level flat, wide surfaces such as the bottom of a shallow dish or plate. It is best for removing large amounts of clay. To sharpen them, simply use a wet sandstone, apply medium to light pressure as you're drawing the edge across the stone. Apply a little pressure or a bit more, depending on how sharp you want the tool to be.
£4.03 inc VAT
Mudtool Bow Harp Spare Wires Straight
Spare wires for the Mudtool Mudcutter and Carving Bows.
Set Of Three
£13.38 inc VAT
Mudtools Bow Harp
The Mudcutter may be the most useful tool that you didn’t know you needed. It’s a wire tool with a ridged bowed frame. This allows you to cut one handed. You can single handedly cut clay from a pug mill or extruder or cut just the right angle on spout before attaching it to the pot. It’s like an extra hand!
The Carving Bow is the little brother of the Mudcutter. It’s well...
£40.00 inc VAT
Small Bevel Cutter
This angle cutter has a 45 and 60 degree wire for cutting angles on the edges of clay slabs. Cuts different angles depending on how you hold the tool – hold flat for 2 angles and hold on its side for different cutting angles.
10cm long x 4.5cm tall.
£8.04 inc VAT
Small Clay Cutting Bow 75mm
This new facet tool is made of tough spring steel and features a fine stainless wire, ideal for cutting facets into pottery. Easily held with one hand. The Yumi is used for trimming uneven rims or creating flat sides on round objects. It is made of steel with rustproof coating.
£2.74 inc VAT
Spare Bow Harp Wire
Spare bow harp wire for the 30cm and 50cm metal bow harps.
Changing/adjusting the wire can be tricky. We recommend pressing down on one side of the harp on a solid surface to create enough bend, to be able to slide the new wire on.
£2.06 inc VAT
Xiem X-Bevel Cutter
X-Bevel is a clay tool that is designed for a quick and precise cutting of clay at 45, 30 and 60-degree angles. It is a must-have hand-building tool for all potters.
£10.97 inc VAT
Natural Jar Cork Stopper Large 68mm
Natural Jar Cork Large
72mm Top
68mm Bottom
20mm High
£2.34 inc VAT
Natural Jar Cork Stopper Medium 43mm
Natural Jar Cork Medium
47mm Top
43mm Bottom
30mm High
£2.10 inc VAT
Natural Jar Cork Stopper Small 29mm
Natural Jar Cork Small
33mm Top
29mm Bottom
20mm High
£1.80 inc VAT
Plastic Tapered Cruet Stoppers
Plastic Tapered Cruet Stoppers
Widest internal dimension 10mm tapered to 9mm
Size: 17mm flange
from £0.15 inc VAT
Round Cane Teapot Handle Ref. CANHR
This smooth plain handle is both functional and beautiful. A lovely accent on your hand-made teapots, small baskets and other vessels. Because cane is a natural material, some variation will occur in thickness and width, but by lightly soaking the handle, it is possible to bend or stretch it to get a perfect fit.
£5.06 inc VAT
Square Cane Teapot Handle
This smooth plain handle is both functional and beautiful. A lovely accent on your hand-made teapots, small baskets and other vessels. Because cane is a natural material, some variation will occur in thickness and width, but by lightly soaking the handle, it is possible to bend or stretch it to get a perfect fit.
£5.06 inc VAT
Adjustable Parallel Lines Clay Cutter
Wooden Adjustable Parallel Lines Clay Cutter Ref.TD8
£6.30 inc VAT
Assorted Plunger Cutters Set Of 6
Assorted Plunger Cutters Set Of 6
This 6 tool set that lets you create shapes out of clay, dough, gum paste, greenware, candle wax, etc. Similar to a cookie cutter they have a brass body and a stainless spring-equipped plunger. The body of each cutter is 1' high and produces a shape approximately 1/2' across. Use the outside shape or apply the cutout inside shape to decorate other pieces.
£10.90 inc VAT
Assorted Plunger Cutters Set Of 6
Assorted Plunger Cutters Set Of 6
This 6 tool set that lets you create shapes out of clay, dough, gum paste, greenware, candle wax, etc. Similar to a cookie cutter they have a brass body and a stainless spring-equipped plunger. The body of each cutter is 1" high and produces a shape approximately 1/2" across. Use the outside shape or apply the cutout inside shape to decorate other pieces.
£10.90 inc VAT
Clay Carving Fettling Tool Double Ended
Multi purpose carving tool. Can be used for creating texture, carving leather hard clay. Also for finishing pieces on the wheel. Two different sized flatten steel ends make this a durable tool.
120mm
£4.94 inc VAT
Clay Smoother With Soft Grip Handle
Flexible spring steel blade with a soft comfort grip for smoothing large slabs of clay.
from £9.00 inc VAT
Double Sided Edge Rounder
Slide this tool along side the edge of your wet or leather hard clay slab to make a beautiful smooth round edge.
Size: Dia 10mm & 15mm
£13.00 inc VAT
Finger Spinner Trimmer Tool
This is rotary tool to help you with trimming pottery on a pottery wheel. Works like a "mini lazy susan".
Works by placing it in a center of the workpiece in order to trim without needing clay lugs. This enables you to hold it down securely while it's spinning.
Two sizes available large is 6cm (2 1/4inch) and medium 4cm (1 1/2 inch) Height is 21mm
Made to order out of PLA plastic....
from £8.00 inc VAT
Fingerdips Glaze Dipping Aid (Pair)
Place over forefinger and thumb when dipping ware to leave a fingermark-free glazed surface. Surface tension holds a small amount of glaze in each cell so that when the ware is released whilst the glaze is still wet after dipping, the marks heal over instantly. They also provide 'grip' and act as a barrier to prevent the skin's oils from affecting glaze adhesion
£3.00 inc VAT