Sea Salt Mayco Stoneware Glaze

Stoneware crystal glazes are designed to expand upon the surface with dazzling bursts of color. Fired results will vary based on ware’s orientation. Crystals will settle to the bottom of the jar and will need a good mixing prior to initial use. Re-stir between each coat. Stir with palette knife or other unpainted tool. Avoid placing crystals near the bottom third of a vertical piece as they may cause additional movement during firing. Crystals will flow more than the base glaze. While the glaze is wet, use your fan brush to redistribute the crystals to achieve balanced coverage. Over-application or heavy deposition of the crystals can cause pinholing or running. When storing a crystal glaze, you may consider storing upside down to facilitate crystal dispersion on the next use.

1230°C (1st image): Sea Salt is a white matte glaze that contains a sage green crystal. As the crystal melts, green blooms appear in the glaze, producing a foamy, textured fired finish.

1300°C (2nd image):  Base glaze turns pale lavender/gray. Crystals are mint green.

Tip: SW-106 Alabaster is the base glaze. For a lighter crystal effect, you may try applying two coats of SW-106 Alabaster with a third coat of SW-118 Sea Salt.

Size: 473ml Brush on liquid glaze.

Note: Due to the discontinuation of the AmTalc 98, Mayco have had to reformulate SW-106 Alabaster, SW-118 Sea Salt, SW153 Indigo Rain, and SW-155 Winter Wood. Users will notice a shift in the wet glazes (from grey to buff) and a slight shift in the fired color result.  Please note that the fired result is dependent on firing temperature, atmospheric conditions of the kiln, application, and underlying clay body. The crystal loading has not changed. See below for the wet glaze color comparison of SW-106 Alabaster and the comparison of fired results on chips. Please see this link for more information (link to Mayco's website)

View other products in Mayco Stoneware Glazes »