All Kilns Wheels & Equipment: Page 3
Grid
List
SHIMPO Adjustable Stool
SHIMPO ADJUSTABLE STOOL
There's no longer any need to struggle with uncomfortable stools, chairs or even boxes when throwing on your Shimpo wheel! This specially designed adjustable stool from Shimpo allows you to set your ideal height (from 19 to 26" in 1" increments) and the tilt feature enables more comfortable working - relieving the strain on your lower back. The stool is attractively...
£88.00 inc VAT
Tall Finger Spinner Trimmer Tool
This is rotary tool to help you with trimming pottery on a pottery wheel. Works like a "mini lazy susan".
Works by placing it in a center of the workpiece in order to trim without needing clay lugs. This enables you to hold it down securely while it's spinning.
Default diameter is 5cm (2 inch) and Height is 70mm
£12.00 inc VAT
Water Resistant Throwing Batts
These are used for throwing large based ware such as plates and platters.
Made from water resistant mdf.
Looking after batts: Clean the board by wiping with a damp cloth or scrubbing with a brush. Do not soak the board or leave it in water for a prolonged period of time.
To avoid warping use both sides of the board . Wipe dry, or allow to dry naturally, standing on end. Do not expose to high...
from £5.20 inc VAT
Wheel Height Throwing Gauge
Handmade
Materials: 3D Print, clay, ceramic, PLA
This is a universal Gauge that can be clamped to a pottery wheel. This will help you to keep the height consistent.
It is one size fits all.
Works by clamping and adjusting the angle to your bowl. The height can be set as desired.
Comes with 2 arms and spare parts.
Do not store in direct sunlight, as this may cause the gauge to distort.
£30.00 inc VAT
Wheel Throwing Gauge Steel EQ0201
Wheel Throwing Gauge Steel EQ0201
Made of steel. Ideal for assisting pottery in consistent and accurate repetition of a series of shapes.
SIZE:[Post height: 580 mm; arm length: 295 mm]
£54.00 inc VAT
Xiem Bat Lifter Tool
Bat Lifter will empower a potter remove any sticky bat or heavy wheel throwing work with confident off the wheel head.
£7.78 inc VAT
Xiem BatMate
Xiem Batmate™ is the perfect solution for annoying bat jitter and warping. Place Batmate™ below your problem bats on the wheel and instantly your warped bats become stable. It is also great for trimming bowls and plates. We at Xiem love ours, and we guarantee you'll love Batmate™ too.
Colour: Blue
Available in 2 different sizes:
•12" diameter
•14"...
£10.97 inc VAT
Xiem Self Adhesive Foam Trimming Batt 356mm
Xiem Studio Tools innovative peel-and-stick self-adhesive foam trimming bat is ideal for trimming large bowls and plates without the use of a coil to attach the piece to the wheel head. The foam bat sticks firmly to all types of 14 wood and plastic bats.
Once applied to the bat, its surface grips the rims of leather hard pieces and holds them in place for trimming. Items can be easily centered using...
£13.04 inc VAT
Orton Mini Pyrometric Cones
Small Cones are commonly used in the Kiln-Sitter®. The tapered shape allows some flexibility to adjust shut-off by placing the thinner or thicker portion of the cone under the sensing rod.
Small Cones can also be used on the kiln shelf as miniature witness cones when space is limited.
Download here the chart
from £0.10 inc VAT
Orton Standard Pyrometric Cones
Pyrometric cones are slender pyramids made from about 100 carefully controlled compositions. Each cone number is unique in measuring temperature within a small temperature range (less than 30°C). Cones measure the amount of heat absorbed. As the cone nears its maturing range, it softens and the tip begins to bend, drawn down by the influence of gravity.
Standard cone heating rate °C per...
from £4.04 inc VAT
4 inch Tile Crank Set
4" Tile Setter Crank Double
Tile crank for 4" tiles
Base: 22cm X 15.7cm
Tile Cranks are used to support tiles in the kiln. The uprights (legs) slot into a base/cover at either end producing a frame into which the tiles are placed. Ledges protruding from the uprights support the tiles. Use our refractory cement to give a secure and rigid assembly. Two base/covers and either three...
from £38.22 inc VAT
6 inch Tile Crank Set
6" Tile Setter Crank
For 6" square tiles
Base size: 17cm X 21cm
Tile Cranks are used to support tiles in the kiln. The uprights (legs) slot into a base/cover at either end producing a frame into which the tiles are placed. Ledges protruding from the uprights support the tiles. Use our refractory cement to give a secure and rigid assembly. Two base/covers and either three or four...
from £38.22 inc VAT
8 inch Tile Crank Set
8" Tile Setter Crank
Base: 26cm X 21.5cm
Tile Cranks are used to support tiles in the kiln. The uprights (legs) slot into a base/cover at either end producing a frame into which the tiles are placed. Ledges protruding from the uprights support the tiles. Use our refractory cement to give a secure and rigid assembly. Two base/covers and either three or four uprights as indicated are needed...
from £38.22 inc VAT
Bar Firing Stilt with 7 Points
3" Bar Firing Stilt with 7 Points
Metal Pointed Stilts perform the same function as disposable stilts but they have sharper metal points which leave smaller marks in the fired glaze. Metal Pointed Stilts can be used many times over.
£4.50 inc VAT
Bead Firing Rack
SMALL BFR1: 100mmL X 90mmH X 60mmW
MEDIUM BFR2: 100mmL X 100mmH X 80mmW
LARGE BFR3: 160mmL X 110mmH X 60mmW
EXTRA LARGE BFR4: 160mmL X 135mmH X 80mmW
They can be fired up to 1260 degC but the bars weaken the higher you fire them so be careful not to overload them. Spread beads evenly along the bar especially the thinner 2mm ones.
The rack will produce black residue upon the first firing,...
from £15.00 inc VAT
Budget Raku Tongs Straight Ref.RAKT-B2
Budget Raku Tongs Straight
101cm Length
67cm Handle
£29.99 inc VAT
Budget Raku Tongs With Teeth Ref.RAKT-1
Budget Raku Tongs With Teeth
80cm Length
45cm Handle
£27.25 inc VAT
Carborundum Abrasive Stick
Count on Carborundum Stones for better abrasive, grinding, shaping, smoothing, deburring, edging, filing, sharpening and finishing needs.
Small Square: 10 x 10 x 100mm
Small Triangle: 14 x 14 x 14 x 100mm
Large Square: 150 X 50 X 25mm
Carborundum is one of the most appreciated stone abrasives in industry. We offer a comprehensive range featuring various shapes for both performance and value...
from £8.68 inc VAT
Ceramic Stilts
Moulded stilts are a popular method of supporting glaze ceramic ware clear of the kiln shelf. Each stilt has three arms, each terminating in an upward and downward point, thus providing minimum contact area.
These Double Pointed stilts are ideal for increasing air flow during your firings, to ensure that all parts of your pot are evenly heated.
These stilts are high alumina stilts, and can be...
from £0.49 inc VAT
Firing Rod 4mm Thick
4mm diameter.
For temperatures upto 1250 °C (depending on load!)
Used to support beads, rings and other small articles during kiln firing. The Bars are designed with a special, high temperature alloy that retains strength in the extreme heat required for ceramic firing.
The rods may bend and will blacken in the kiln but this is completely normal. Please note the rods get weaker the higher...
from £1.50 inc VAT
Firing Rod 5mm Thick
5mm diameter.
For temperatures upto 1250 °C (depending on load!)
Used to support beads, rings and other small articles during kiln firing. The Bars are designed with a special, high temperature alloy that retains strength in the extreme heat required for ceramic firing.
The rods may bend and will blacken in the kiln but this is completely normal. Please note the rods get weaker the higher...
from £1.92 inc VAT
Galvanized Metal Smoke Mini Bin
Metal mini bin, used for smoke firing. Simply load with combustibles and plunge in your hot raku fired pots and let them smoulder.
28cm Diameter
35cm Heigh
Comes with a free bag of wood chippings, while stocks last!
£18.99 inc VAT
Green Welders Goggles Ref.GOGG
Panoramic lens with anatomically designed soft frames provide the wearer with full protection, a comfortable fit and maximum peripheral vision.
Comfortable, ergonimcally designed full vision welding goggle
Can be worn over most prescription spectacles
Sophisticated indirect ventilation system
Easy lens replacement
Maximum UV protection
Highest optical quality lens - class 1
Apprved...
£12.07 inc VAT
Hexagonal Bed Of Nails 92 Pins Ref. BEDO
This hexagonal bed of nails is used to allow glazed ware to be protected all over, rather than dry footing items. Stilting ceramic pieces help keep moisture out of the ware and help against crazing. They are also a good aid against protecting the kilns shelves from glaze. Please note, to help prolong the life of your kiln furniture/stilts it is advisable to apply some batt wash periodically.
As...
£15.46 inc VAT
Individual Tile Setter Base/Top
Tile cranks have two components - the uprights and the base/cover. The tile size determines which base/cover is required and the height of the stacking area and thickness of the tile determine the upright size. The uprights slot into a base/cover at either end, producing a frame into which the tiles are place ready for firing. Ledges protrude from the uprights support the tiles. Use our two part tile...
from £7.00 inc VAT
Individual Tile Setter Legs
Tile cranks have two components - the uprights and the base/cover. The tile size determines which base/cover is required and the height of the stacking area and thickness of the tile determine the upright size. The uprights slot into a base/cover at either end, producing a frame into which the tiles are place ready for firing. Ledges protrude from the uprights support the tiles. Use our two part tile...
from £6.36 inc VAT
Kemper Element Staples Pack Of 12
Hold loose kiln elements in place with these easy to insert, sharp-ended staples. These 1.5' pins are of a heat resistant alloy for temperatures to 1346∞ C (Cone 13). 12 per package.â€
£8.34 inc VAT
Kevlar Knitted Heat Resistant Glove
Gauge 7 Kevlar knitted glove with 100% cotton lining and elasticated wrist. For the handling of hot, cutting parts. Seamless for an excellent touch.
Withstands 20.2 seconds at 250degC and 14.5 seconds at 350degC. Ambidextrous. Size 9. Intermediate design.
£37.08 inc VAT
Leather Lined Gauntlet
A pair of great quality heavy duty gauntlets.
Leather construction, 14inch long. Lined for comfort.
NOT RECOMMENDED FOR RAKU FIRINGS as they don't provide required heat protection.
Ideal for personal hand protection when taking warm items out of the kiln.
£9.59 inc VAT
Metal 3 Pointed Stilt
Metal 3 Pointed Stilt
Metal Pointed Stilts perform the same function as disposable stilts but they have sharper metal points which leave smaller marks in the fired glaze. Metal Pointed Stilts can be used many times over.
As a general rule we wouldn't recommend using stilts to fire stoneware items. Due to the higher temperatures involved, there is a greater chance of the pieces fusing or...
from £1.92 inc VAT
Metal 6inch Tile Holder Shims
Turns the large and extra large multichoice bead rack into a tile stand.
Contains 4 shims which hold 6" tiles.
£5.44 inc VAT
Metal Bowl-Baubles Firing Stand
Deisgned to aid firing small bowls and baubles, simply upturn the piece and balance on the nichrome rod.
150mm tall.
1100degC
They can be fired up to 1250 degC but the vertical rods weaken the higher you fire them so be careful not to overload them. Heavy beads and pendants will cause the rod to bend, be careful not to overload.
The stand will produce black residue upon the first firing,...
£6.48 inc VAT
Metal Plate Firing Star
Easy way to fire plates.
Made out of stainless steel for temperatures up to 1250C (depending on load!) This kind of kiln furniture lasts longer than stilts made out of ceramics.
Each brick is 60 x 30 x 20 mm with 2 Grooves + 1 Hole 4 mm Ø
Each set comprises of two metal firing stars and six bricks.
from £9.49 inc VAT
Single Point Metal Spur Steel Stilt SS6
Single Point Metal Spur Steel Stilt SS6
In 1mm thick high grade steel. Pushed out part 9mm high.
£0.88 inc VAT
Single Steel Stilts
Single Steel Stilt
In high grade steel. Material thickness 1.5mm - 2mm depends on shank length. Almost scale free. Smooth surface, precision made.
These stilts will produce a black residue upon the first firing, however this is just oxidation. This may transfer to your piece.
Suitable upto 1250degC
from £1.58 inc VAT
Standard Cone Stands
Re-useable 3 Socket Standard Cone Stand Singular
How to use guide
£3.10 inc VAT
Xiem Sanding Sticks For Coloured Clay
Xiem double-sided and washable Sanding Sticks are made from aluminum oxide grit on a firm backing. No sanding block is needed. They’re perfect for sanding, shaping, refining, and finishing a variety of surfaces and materials such as woods, plastics, acrylics, alabasters, and ceramics—green wares and bisque wares. Available in a pack of two for fine, medium, or coarse grit.
Size 1.25...
£2.34 inc VAT
Xiem Sanding Sticks For Porcelain
Xiem double-sided and washable Sanding Sticks are made from aluminum oxide grit on a firm backing. No sanding block is needed. They are designed specifically for sanding, shaping, refining, and finishing on porcelain green wares and bisque wares. They also work well with woods, plastics, acrylics, and alabasters. Available in a pack of two for fine, medium, or coarse grit.
Size 1.25 “W x 7”L
Available...
£2.34 inc VAT
Ceramic Buttons
Ceramic Buttons used to attach ceramic fibre to the internal dimensions of a kiln.
To attach: place buttons ove fibre and thread nicrome wire (high temp) through button fibre and kiln surface.†Secure connection buy twisting wire on top of cover...careful not to compress fibre as you will lose some insulating quality.
from £1.21 inc VAT